About Us

Industry dynamics

More>>

Main structure of film blowing machine

Release time:

2024/06/06 14:24

It is mainly composed of extruder, head, die head, cooling device, foam stabilization rack, herringbone plate, traction roller, coiling device, etc.

Frequency conversion application of film blowing machine

Release time:

2024/06/06 14:23

The dry polyethylene particles are added into the lower hopper, and the weight of the particles themselves enters the screw from the hopper. When the particles contact with the inclined edge of the thread, the rotating inclined edge generates thrust perpendicular to the inclined edge on the plastic, pushing the plastic particles forward. During the pushing process, due to the friction between the plastic and the screw, the plastic and the barrel and the collision friction between the particles, at the same time, it is also gradually melted due to the external heating of the barrel. The molten plastic is filtered by the machine head to remove impurities from the die mouth of the die head, cooled by the air ring, blown through the herringbone plate, traction roller, and wound to roll the finished film into a cylinder.

Energy Saving Transformation of Blown Film Machine

Release time:

2024/06/06 14:23

The energy saving of the film blowing machine can be divided into two parts: one is the power part and the other is the heating part.

What should be paid attention to when using the degradable film blowing machine?

Release time:

2024/06/06 14:20

Because the degradable film is a new type of degradable plastic film, which is different from ordinary plastic film. The degradable film can be degraded without causing harm and pollution to the environment. In a sense, the first generation of visible decomposition plastics, so the production process The requirements are very high, otherwise it cannot be manufactured. This uses the degradable film blowing machine, on the one hand, due to the needs of the public, on the other hand, due to the needs of the epidemic, the degradable film blowing machine has a broader market. In short, the degradable film blowing machine is a large machine, and several places should be paid attention to when using it. A little carelessness may cause danger. I will explain to you below.

Professional production process and rich market experience

Release time:

2024/06/06 14:19

Stay engaged with customers and understand their needs. We are not allowed to stand in front of the film blowing machine to avoid harm to the human body. We are also not allowed to stand in gloves to prevent gloves from being involved and causing wear to the machine. Sundries should be placed farther to prevent falling into the barrel. Before starting up, check whether the power supply of each circuit is normal to eliminate leakage problems so as not to affect production. Will guide customers to choose the right will be lonely blowing film machine. We have a lot of experience in the market.

Heating modification of film blowing machine

Release time:

2024/06/06 14:19

To remove the original heating ring of the modified part of the barrel.

Business Opportunity Information

Main structure of film blowing machine

Main structure of film blowing machine

It is mainly composed of extruder, head, die head, cooling device, foam stabilization rack, herringbone plate, traction roller, coiling device, etc.
Frequency conversion application of film blowing machine

Frequency conversion application of film blowing machine

The dry polyethylene particles are added into the lower hopper, and the weight of the particles themselves enters the screw from the hopper. When the particles contact with the inclined edge of the thread, the rotating inclined edge generates thrust perpendicular to the inclined edge on the plastic, pushing the plastic particles forward. During the pushing process, due to the friction between the plastic and the screw, the plastic and the barrel and the collision friction between the particles, at the same time, it is also gradually melted due to the external heating of the barrel. The molten plastic is filtered by the machine head to remove impurities from the die mouth of the die head, cooled by the air ring, blown through the herringbone plate, traction roller, and wound to roll the finished film into a cylinder.
Energy Saving Transformation of Blown Film Machine

Energy Saving Transformation of Blown Film Machine

The energy saving of the film blowing machine can be divided into two parts: one is the power part and the other is the heating part.
What should be paid attention to when using the degradable film blowing machine?

What should be paid attention to when using the degradable film blowing machine?

Because the degradable film is a new type of degradable plastic film, which is different from ordinary plastic film. The degradable film can be degraded without causing harm and pollution to the environment. In a sense, the first generation of visible decomposition plastics, so the production process The requirements are very high, otherwise it cannot be manufactured. This uses the degradable film blowing machine, on the one hand, due to the needs of the public, on the other hand, due to the needs of the epidemic, the degradable film blowing machine has a broader market. In short, the degradable film blowing machine is a large machine, and several places should be paid attention to when using it. A little carelessness may cause danger. I will explain to you below.
Professional production process and rich market experience

Professional production process and rich market experience

Stay engaged with customers and understand their needs. We are not allowed to stand in front of the film blowing machine to avoid harm to the human body. We are also not allowed to stand in gloves to prevent gloves from being involved and causing wear to the machine. Sundries should be placed farther to prevent falling into the barrel. Before starting up, check whether the power supply of each circuit is normal to eliminate leakage problems so as not to affect production. Will guide customers to choose the right will be lonely blowing film machine. We have a lot of experience in the market.
Heating modification of film blowing machine

Heating modification of film blowing machine

To remove the original heating ring of the modified part of the barrel.

Product Label

extruder

which

fuselage

co-extrusion

full-automatic

barrier

Service hotline:

86 27-8816 5025

E-mail: whyfsj2004@sina.com

Address: Building C- F14, Huazhong International Industrial Park, Yangluo District, Wuhan City, Hubei Province

Cookie

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

Cookie

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

Focus on us

WUHAN YINFENG PLASTIC MACHINERY CO., LTD